CP1510 150A DC-10MHz

The CP1510 is a high-frequency AC/DC current probe in the Micsig CP series for oscilloscope-based current waveform capture. It combines wide bandwidth with dual current ranges so the same probe can resolve small-signal behavior and higher continuous or peak currents in power-electronics and industrial designs.

Bandwidth is DC–10 MHz with ≤46 ns rise time. Selectable ranges are 30 A / 150 A (dual range), with maximum input 150 Arms continuous, 300 Apk. Typical accuracy is ±1% on continuous current at DC and line frequency (45–66 Hz). Output sensitivity is 0.1 V/A (30 A) and 0.01 V/A (150 A); lowest measurable current is about 10 mA (30 A range) / 100 mA (150 A range). The clamp jaw accepts conductors up to 20 mm diameter.

A universal BNC output works with most oscilloscopes when the channel input is set to 1 MΩ. One-button degauss/auto-zero and over-current indication simplify setup. Power is supplied from the included DC 12 V adapter (do not power from the oscilloscope USB port). Typical uses include switching power supplies, motor drives, EV and industrial electronics, and semiconductor/inverter characterization.

• Bandwidth: DC–10 MHz; rise time ≤46 ns
• Ranges: 30 A / 150 A (dual range); max input 150 Arms continuous, 300 Apk
• Accuracy: typ. ±1% (DC / 45–66 Hz continuous); sensitivity 0.1 V/A (30 A) and 0.01 V/A (150 A)
• Max. conductor diameter: 20 mm; interface: BNC; power: DC 12 V